&Saving spool file / Entry not in queue ■Invalid queue element ² Core routine number out of range ⁿUnimplemented core routine √#Invalid Power Manager queue element °0No debugger installed to handle debugger command ≈Miscellaneous system error ÷MacsBug installed ⌡Disassembler installed ⌠,Process ID not in valid range or unavailable ≤Extensions disabled ∩HDriver can't respond to Control call / Unimplemented control instruction ε#Driver can't respond to Status call φ!Driver can't respond to Read call ∞"Driver can't respond to Write call δ0Driver reference number doesn't match unit table Ω:Driver reference number specifies NIL handle in unit table Θ(Attempt to open RAM Serial Driver failed Φ Close error τ Attempt to remove an open driver µ%Couldn't find driver in resource file σ/I/O request aborted by KillIO / I/O abort error ΣDriver isn't open π Unit table has no more entries ΓDCE extension error ▀File directory full ▐,All allocation blocks on the volume are full ▌ Specified volume doesn't exist ▄ I/O error █2Bad file name or volume name (perhaps zero-length) ┌
File not open ┘1Logical end-of-file reached during read operation ╪(Attempt to position before start of file ╫+Memory full (open) or file won't fit (load) ╓Too many files open ╒File not found ╘&Volume is locked by a hardware setting ╙File is locked ╥#Volume is locked by a software flag ╤(File is busy; one or more files are open ╨:File with specified name and version number already exists ╧MThe read/write permission of only one access path to a file can allow writing ╬.Bad positioning information / Bad drive number ═7Path reference number specifies nonexistent access path ╠Error getting file position ╦Volume not on-line ╩'Attempt to open locked file for writing ╔/Specified volume is already mounted and on-line ╚queue ╟=Not a Macintosh disk; volume lacks Macintosh-format directory ╞number is greater than 1024 ┼Problem during rename ─4Bad master directory block; must reinitialize volume ├+Read/write permission doesn't allow writing └:Drive isn't connected / Font declaration error / I/O error ┐$No disk in drive / Font not declared ╛3Disk is probably blank / Font substitution occurred ╜Can't find an address mark ╝Read verify failed ╗(Bad address mark (checksum didn't check) ║#Bad address mark (bit slip nibbles) ╣Can't find a data mark ╕Bad data mark checksum ╖ Bad data mark bit slip nibbles ╢Write underrun occurred ╡ Drive error ┤Can't find track 0 │%Can't initialize disk controller chip ▓6Tried to read side 2 of a disk in a single-sided drive ▒!Can't correctly adjust disk speed ░0Drive error (track number wrong in address mark) »Can't find sector «&Can't find sector 0 after track format ¡Cannot synchronize ¼"Track failed to verify / I/O error ½Unable to read clock ¬Time written did not verify ⌐$Parameter RAM written did not verify ¿Parameter RAM uninitialized ºSCC receiver error ªSCC break received Ñ ddpSktErr ñ AppleTalk data length too big úNo AppleTalk bridge found ó/AppleTalk error in attaching/detaching protocol í'Excessive collisions on AppleTalk write ƒ&Driver open error; port already in use ₧:Driver open error; port not configured for this connection ¥ Error in ROZ £ Desk scrap isn't initialized Ü No object of that type in scrap ö Not enough room in heap zone ôNIL master pointer Æ Address was odd, or out of range æ"Attempt to operate on a free block É0Attempt to purge a locked or non-purgeable block Å Address in zone check failed ÄPointer check failed ìBlock check failed îSize check failed ïBlock is locked êDirectory not found ç!Too many working directories open å,Attempt to move into offspring (file system) àCAttempt to do a hierarchical operation on a non hierarchical volume ä#Server volume has been disconnected â&Insufficient memory to update a pixmap é$System error code for MBDF not found ü(Could not find HMenu's parent in MenuKey ÇUser canceled the query ~No file thread exists }Directory specified |File id already exists o Not enough memory for picture m;Region accumulation failed. Resulting region may be corrupt l/Pixel map record is deeper than 1 bit per pixel k?QuickDraw could not complete the operation (insufficient stack) j#Color2Index failed to find an index i2Failed to allocate memory for temporary structures h'Failed to allocate memory for structure g!Range error in colorTable request f%ColorTable entry protection violation e Invalid type of graphics device d!Invalid resolution for MakeITable cInvalid pixel depth bInvalid parameter G#Extended resource has a bad format. F6Resource bent - Can't decompress a compressed resource DResource already in memory CWriting past end of file B Offset or count out of bounds @Resource not found ?Resource file not found >AddResource failed =AddReference failed <RmveResource failed ;RmveReference failed :Resource attribute error 9Resource map read error 8No sound hardware 7;All available channels are already open for the synthesizer 5Sound channel full 4Sound resource error 3Bad sound channel specified 2
Bad format 1 Could not allocate enough memory 0&Corrupt/bad format or not of type AIFF /!The Channel is being used already .%Can not operate in the memory allowed -Channel not currently used ,.Not enough CPU cycles left to add another task +A parameter is incorrect $No Sound Input hardware #Invalid Sound Input device "No buffer specified !Invalid compression type *Hard disk drive too slow to record to disk Invalid sample rate Invalid sample size Input device already in use Input device could not be opened %Invalid input device reference number Input device hardware failure Unknown type of information Unknown quality No synthesizer found Synthesizer open failed Synthesizer not ready
Buffer too small Voice not found Incompatible voice
Bad dictionary format Bad input text No client with that ID found No port with that ID found .Too many ports already installed in the system Too many connections made "Pending virtual connection created #Pending virtual connection resolved "Pending virtual connection removed ■ ,No connection exists between specified ports ■■5MIDIWritePacket couldn't write to all connected ports ■²*Name supplied is longer than 31 characters ■ⁿDuplicate client ID ■√#Command not supported for port type ■▐ SDM could not be initialized ■▌,Slot Resource Table could not be initialized ■▄,Slot Resource Table could not be initialized ■█ Cards could not be initialized ■╒Wrong queue type ■╘No card in slot ■╙CRC check failed ■╥The format is wrong ■╤,The revision of the declaration ROM is wrong ■╨There is no directory ■╧The longword test failed ■╬9The SDM was unable to allocate memory for the sInfo array ■═0A reserved field of the declaration ROM was used ■╠ An unexpected bus error occurred ■╦$A valid ByteLane field was not found ■╩$The F-Header block could not be read ■╔(The F-Header block could not be disposed ■╚%Error occurred during _DisposePointer ■╟No board sResource ■╞"Error occurred during _sGetPRAMRec ■┼ No board id ■─6The InitStatus_V field was negative after primary init ■├AError occurred while trying to initialize the slot resource table ■┬#SDM jump table could not be created ■┴(Board ID was wrong: Init the PRAM record ■└Bus error timeout ■╢(Reference id not found in the given list ■╡6The id's in the given sList are not in ascending order ■┤ A reserved field was not zero ■│3The revision code to be executed by sExec was wrong ■▓;The CPU field of the code to be executed by sExec was wrong ■▒)The sPointer is nil; no list is specified ■░-The physical block size of an sBlock was zero ■»$Slot out of bounds or does not exist ■«Selector out of bounds ■¡ Error occurred during _NewPtr ■¼ Error occurred during _BlockMove ■½Status of slot is bad ■¬#Error occurred during _sGetDrvrName ■⌐#Error occurred during _sDisDrvrName ■¿No more sResources ■º!Error occurred during _sGetDriver ■ª%Bad sPointer was passed to a SDM call ■Ñ&NumByteLanes was determined to be zero ■ñOffset was too big ■ú$No opens were successful in the loop ■ó SRT overflow ■íRecord not found in the SRT ■ÿInvalid slot number ■p&GCR format on high density media error ■f The file is not a dictionary ■cCan't allocate disk space ■bRecord already exists ■aRecord cannot be found ■`/Maximum key length is too long or equal to zero ■_ There is no such a key attribute ■>:Edition manager not initialized or could not load package. ■=Not a valid section type ■< Not a registered section type ■;Edition file is corrupt ■:7Bad edition container spec or invalid edition container ■44A Publisher is already registered for that container ■3Alias was not resolved ■2(Container already opened by this section ■15Not the first registered publisher for that container ■*.Invalid field(s) in the parameter block (SCSI) ■)+Attempted to transfer too many bytes (SCSI) ■(4Write flag conflicts with data transfer phase (SCSI) ■'%(SCSI)us error during transfer (SCSI) ■&,scsiSelTO exceeded (selection failed) (SCSI) ■%scsiReqTO exceeded (SCSI) ■$5The bus was reset, so your request was aborted (SCSI) ■#,Non-zero (not 'Good') status returned (SCSI) ■"/Device did not go through a status phase (SCSI) ■!$Linked command never executed (SCSI) ■'Unimplemented routine was called (SCSI) ■User debugger break ■-User debugger break - display string on stack ■/User debugger break - execute commands on stack ■ Region is too big ■ 'Scrap item too big for text edit record ■
Bad selector for _HWPriv ²¿8No eligible process with specified process serial number ²º?Not enough room to launch application with special requirements ²ª:Memory mode is 32-bit, but application is not 32-bit clean ²Ñ/Application made module calls in improper order ²ñ.Hardware configuration is not correct for call ²ú*Application SIZE not big enough for launch ²ó Application is background only ²íBuffer is too small ²á No outstanding high-level event ²ƒConnection is invalid ²₧"Cannot interact directly with user ²ù Thread Manager--Too many reqs ²ûThread not found ²òBad thread protocol ²ö Insufficient physical memory ²ô%Specified range of memory is not held ²Æ&Cannot make specified range contiguous ²æ'Specified range of memory is not locked ²É Called with interrupts masked ²Å$Unable to defer additional functions ⁿαThe data item was NULL ⁿ▀(Data available or successfully retrieved ⁿ▐Error executing function ⁿ▌)Next data item not of requested data type ⁿ▄Function timed out ⁿ█Query currently executing ⁿ┌Session ID is invalid ⁿ┘Invalid session number ⁿ╪7Couldn't open or find the specified database extension. ⁿ╫3The database extension does not support async calls ⁿ╓!Invalid parameter block specified ⁿ╒.No application handler for specified data type ⁿ╘
Wrong version ⁿ╙/Attempt to call other routine before InitDBPack ⁿ«3Show Balloons mode was off, call to routine ignored ⁿ¡!Help Manager - resource not found ⁿ¼ Help Manager - out of memory ⁿ½GBecause of constant cursor movement, the help balloon was not displayed ⁿ¬*Menu & item is same as previous menu, item ⁿ⌐Help menu not set up ⁿ¿Help Manager - bad selector ⁿº No balloon content to fill in ⁿª+Help manager resource was the wrong version ⁿÑ(Help message record contained a bad type ⁿñ%Help Manager - could not load package ⁿú-Invalid method passed in the method parameter ⁿóNo balloon showing ⁿí3User using Close View won't let you remove balloons ⁿ|PPCToolBox not initialized ⁿz>Invalid or inappropriate locationKindSelector in location name ⁿy%Unable to open port or bad portRefNum ⁿx7The system is unable to allocate memory, critical error ⁿw&Network activity is currently disabled ⁿv"Port does not exist at destination ⁿuOut of session tables ⁿt Invalid session reference number ⁿs,Bad parameter or invalid state for operation ⁿr%A port is already open with this name ⁿq(User name unknown on destination machine ⁿp(Destination rejected the session request ⁿoBUser hasn't named his Macintosh in the Sharing Setup Control Panel ⁿn A system resource is missing ⁿm Unable to contact application ⁿlThe port was closed ⁿkThe session was closed ⁿiPPCPortRec malformed ⁿfDUser hasn't specified an owner's name in Sharing Setup Control Panel ⁿe)The default userRefNum does not yet exist ⁿd!Unable to create a new userRefNum ⁿc!Error has occurred in the network ⁿb?PPCStart failed because destination did not have inform pending ⁿaUser's password is wrong ⁿ` Invalid user reference number ⁿ^&Illegal service type, or not supported ⁿ]Location name is invalid ⁿ\(Destination port requires authentication ⁿ
No mask found ⁿBad shared library ⁿ
Mixed mode failure ⁿ NBP buffer overflow √ NBP name not confirmed √■'NBP name confirmed for different socket √²!NBP duplicate name already exists √ⁿNBP name not found √√"NBP names information socket error √╓&Server cannot support this ASP version √╒Buffer too small √╘No more sessions on server √╙No servers at that address √╥ASP parameter error √╤"Server cannot open another session √╨Session closed √╧Command block too big √╬Too many server clients √═*No acknowledge on server attention request √╕*ATPSndRequest failed: retry count exceeded √╖ ATP too many concurrent requests √╢ ATP too many responding sockets √╡ATP bad responding socket √┤ATP bad sequence number √│ATP no release received √▓ATP control block not found √▒!ATPAddRsp issued before ATPSndRsp √░ Too many outstanding ATP calls √»Request aborted √"Open connection request was denied √ DSP Read/Write Queue Too small √ Read terminated by forward reset √Attention message too long √ Open connection request failed √'Bad connection state for this operation √Control call was aborted √ Bad connection refNum ·∞No file thread exists. ·δFile id already exists ·ΩDirectory specified ·ΘFiles on different volumes ·Φ The catalog has been modified ·τ$Desktop database files are corrupted ·µ!Can't exchange a file with itself ·σ9File id is dangling or doesn't match with the file number ·Σ;When _Mount allows only remounts and doesn't get a remount. ∙\4Data could not be coerced to the requested data type ∙[Descriptor was not found ∙Z'Data in an AppleEvent could not be read ∙Y.Data with a keyword was expected but not found ∙X!Not a valid AppleEvent descriptor ∙W"Specified list item does not exist ∙V(Need newer version of AppleEvent Manager ∙U%The event is not in AppleEvent format ∙T-The AppleEvent was not handled by any handler ∙S2AEResetTimer was passed an invalid reply parameter ∙RNMode wasn't NoReply, WaitReply, or QueueReply; or Interaction level is unknown ∙Q>In AESend, User canceled out of wait loop for reply or receipt ∙PAppleEvent timed out ∙ONo user interaction allowed ∙N.There is no special function with this keyword ∙M%A required parameter was not accessed ∙L$The target address type is not known ∙K5No handler in the dispatch tables fits the parameters ∙J@The contents of the reply you are accessing have not arrived yet ∙I(Index is out of range in a put operation ∙HImpossible range ∙GWrong number of arguments ∙EAccessor not found ∙CNo such logical operator ∙B Bad test key ∙ANot an object specifier ∙@No such object ∙?Negative count ∙>Empty list container °°Apple Event offset invalid °≈"Apple Event offset outside of view °εApple Event top of document °φApple Event top of body °∞Apple Event end of document °δApple Event end of body °╞Unknown drag reference °┼Unknown drag item reference °─"Unknown flavor type (Drag Manager) °├)Flavor type already exists (Drag Manager) °┬4Error while trying to get flavor data (Drag Manager) °┴%Handler already exists (Drag Manager) °└ Handler not found (Drag Manager) °┐!Drag was not accepted by receiver °0 Could not resolve data reference °/Bad image description °.Bad public movie atom °-Can't find handler °,Can't open handler °+Bad component type °*No media handler °)No data handler °(
Invalid media °'
Invalid track °&
Invalid movie °%Invalid sample table °$Invalid data reference °#Invalid handler °"Invalid duration °! Invalid Time ° Can't put public movie atom °
Bad edit list ° Media types don't match ° Progress proc aborted ° Movie toolbox uninitialized °WF file not found ° Can't create single fork file °Invalid edit state °Non-matching edit state °Stale edit state °User data item not found °Max size to grow too small °Bad track index °Track ID not found °Track not in movie °Time not in track °Time not in media °Bad edit index °Internal QuickTime error °
Invalid chunk number ° Invalid sample description index °Invalid chunk cache °Invalid sample description °Data not open for read °Data not open for write °Data already open for write °data already closed °End of data reached °No data reference ° No movie found ≈ Invalid data reference container ≈■Bad data reference index ≈²No defaultdata reference ≈ⁿ Couldn't use an existing sample ≈√Feature unsupported ≈≈!Unsupported auxiliary import data ≈÷!Auxiliary export data unavailable ≈⌡Samples already in media ≈≥Movie text not found ÷<!Unsupported script language error ÷;TSM input method not found ÷:TSM not an application ÷9"TSM application already registered ÷8 TSM application not registered ÷7 Invalid TSM documentation ID ÷6 TSM document is still active ÷5TSM document is not active ÷4TSM no open text service ÷3 TSM can't open the component ÷2TSM no text service found ÷1 TSM there are open documents ÷0/Not TSM aware because we are using input window ÷/ TSM the text service has no menu ÷. TSM text service is not open ÷-0TSM text service already opened for the document ÷,%TSM returned by GetDefaultInputMethod ÷+1TSM script has no input method or is using old IM ÷* TSM Unsupported interface type ÷)TSM unknown error ÷"Mixed mode internal error ⌡`%AppleScript can't consider and ignore ⌡_'AppleScript can't compare more than 32k ⌡8(AppleScript terminology nesting too deep ⌡7$AppleScript illegal formal parameter ⌡6#AppleScript parameter not for event ⌡5 AppleScript no result returned ⌡$ AppleScript inconsistent names ⌡ Fragment contextID not valid ⌡ Fragment connectionID not valid ⌡'Fragment symbol not found in connection ⌡
Fragment section not found ⌡ +Fragment library name not found in registry ⌡ 'Fragment registered name already in use ⌡
!Fragment container format unknown ⌡ -Loaded fragment had 'hard' unresolved imports ⌡/Fragment out of memory for internal bookkeeping ⌡CFragment out of memory in user's address space for loadable section ⌡ Fragment no more context id╒s ⌡CFragment order error during user initialization function invocation ⌡:Import library/file was too old and therefore incompatible ⌡:Import library/file was too new and therefore incompatible ⌡?Fragment circularity detected in mandatory initialization order ⌡ 'Boot library has initialization routine ⌠ ;Error connecting to library (error occurred in sub prepare) ⌠■ Error in initialization of CFM ⌠² Fragment internal inconsistency ⌠ⁿ+Fragment container corrupted (known format) ⌠√9Fragment user initialization routine did not return noErr ⌠·2No application found in cfrg (for Process Manager) ⌠∙2Fragment targeted for an unacceptable architecture ⌠°Invalid fragment usage ⌠HInvalid component ID ⌠GValid instances exist ⌠FComponent not captured ⌠EComponent doesn't register ⌠/Invalid translation path ⌠.Could not parse source file ⌠*No translation path ⌠)Bad translation spec ⌠( noPrefAppErr ≤πCALAP frame too large for buffer / DDP datagram too large for buffer ≤ΓMPP driver not installed ≤ßDDP bad checksum ≤α NBP can't find tuple in buffer ≤▀5Socket or protocol type invalid or not found in table ≤▐ ATP response message too large ≤▌ Bad response from ATPRequest ≤▄ABRecord not found ≤█MAsynchronous call aborted because socket was closed before call was completed ≤▓-A Bad address was specified (OTBadAddressErr) ≤▒+A Bad option was specified (OTBadOptionErr) ≤░'Missing access permission (OTAccessErr) ≤»*Bad provider reference (OTBadReferenceErr) ≤«)No address was specified (OTNoAddressErr) ≤¡*Call issued in wrong state (OTOutStateErr) ≤¼4Sequence specified does not exist (OTBadSequenceErr) ≤½'A system error occurred (OTSysErrorErr) ≤¬+An event occurred - call Look() (OTLookErr) ≤⌐6An illegal amount of data was specified (OTBadDataErr) ≤¿2Passed buffer not big enough (OTBufferOverflowErr) ≤º'Provider is flow-controlled (OTFlowErr) ≤ª+No data available for reading (OTNoDataErr) ≤Ñ6No disconnect indication available (OTNoDisconnectErr) ≤ñ6No Unit Data Error indication available (OTNoUDErrErr) ≤ú,A Bad flag value was supplied (OTBadFlagErr) ≤ó8No orderly release indication available (OTNoReleaseErr) ≤í,Command is not supported (OTNotSupportedErr) ≤á6State is changing - try again later (OTStateChangeErr) ≤ƒ?Bad structure type requested for OTAlloc (OTNoStructureTypeErr) ≤₧,Bad name, address or endpoint (OTBadNameErr) ≤¥5A Bind to an in-use addr with qlen > 0 (OTBadQLenErr) ≤£6Address requested is already in use (OTAddressBusyErr) ≤¢5Accept failed because of pending listen (OTIndOutErr) ≤Ü@Tried to accept on incompatible endpoint (OTProviderMismatchErr) ≤Ö ResQLen error (OTResQLenErr) ≤ÿ"ResAddress error (OTResAddressErr) ≤ùQFull error (OTQFullErr) ≤û6An unspecified provider error occurred (OTProtocolErr) ≤ò3A synchronous call at interrupt time (OTBadSyncErr) ≤ö)The command was cancelled (OTCanceledErr) ≤Ç Permission denied (EPERMErr) ≤%No such file or directory (ENOENTErr) ≤~ No such resource (ENORSRCErr) ≤}%Interrupted system service (EINTRErr) ≤|I/O error (EIOErr) ≤{$No such device or address (ENXIOErr) ≤xBad file number (EBADFErr) ≤v%Try operation again later (EAGAINErr) ≤u Not enough space (ENOMEMErr) ≤t Permission denied (EACCESErr) ≤sBad address (EFAULTErr) ≤q"Device or resource busy (EBUSYErr) ≤pFile exists (EEXISTErr) ≤nNo such device (ENODEVErr) ≤k Invalid argument (EINVALErr) ≤h"Not a character device (ENOTTYErr) ≤aBroken pipe (EPIPEErr) ≤_-Message size too large for STREAM (ERANGEErr) ≤^&or a deadlock would occur (EDEADLKErr) ≤\$Address already in use (EALREADYErr) ≤[,Socket operation on non-socket (ENOTSOCKErr) ≤Z.Destination address required (EDESTADDRREQErr) ≤Y Message too long (EMSGSIZEErr) ≤X.Protocol wrong type for socket (EPROTOTYPEErr) ≤W'Protocol not available (ENOPROTOOPTErr) ≤V+Protocol not supported (EPROTONOSUPPORTErr) ≤U.Socket type not supported (ESOCKTNOSUPPORTErr) ≤T1Operation not supported on socket (EOPNOTSUPPErr) ≤Q&Address already in use (EADDRINUSEErr) ≤P1Can't assign requested address (EADDRNOTAVAILErr) ≤O Network is down (ENETDOWNErr) ≤N'Network is unreachable (ENETUNREACHErr) ≤M2Network dropped connection on reset (ENETRESETErr) ≤L2Software caused connection abort (ECONNABORTEDErr) ≤K(Connection reset by peer (ECONNRESETErr) ≤J&No buffer space available (ENOBUFSErr) ≤I(Socket is already connected (EISCONNErr) ≤H%Socket is not connected (ENOTCONNErr) ≤G/Can't send after socket shutdown (ESHUTDOWNErr) ≤F3Too many references: can't splice (ETOOMANYREFSErr) ≤E#Connection timed out (ETIMEDOUTErr) ≤D$Connection refused (ECONNREFUSEDErr) ≤AHost is down (EHOSTDOWNErr) ≤@"No route to host (EHOSTUNREACHErr) ≤;PROTO error (EPROTOErr) ≤:TIME error (ETIMEErr) ≤9NOSR error (ENOSRErr) ≤8Bad Message (EBADMSGErr) ≤7Cancel error (ECANCELErr) ≤6No Stream error (ENOSTRErr) ≤5No Data error (ENODATAErr) ≤4"In Progress error (EINPROGRESSErr) ≤3SRCH error (ESRCHErr) ≤2 No Message error (ENOMSGErr) ≤1.Client not initialized (OTClientNotInittedErr) ≤0 Port has died (OTPortHasDiedErr) ≤/'Port was rejected (OTPortWasEjectedErr) ≤.)Bad configuration (OTBadConfigurationErr) ≤-1Configuration changed (OTConfigurationChangedErr) ≤,)User Requested error (OTUserRequestedErr) ≤++Port Lost Connection (OTPortLostConnection) ≡ :Printing failure: no free connect control blocks available ∩ 1Printing failure: bad connection reference number ∩■(Printing failure: request already active ∩²'Printing failure: write request too big ∩ⁿ Connection to printer closed ∩√Printer not found or closed ∞x,Insufficient access privileges for operation ∞w6Further information required to complete AFPLogin call ∞v,Unknown user authentication method specified ∞u$Unknown AFP version number specified ∞t(Bitmap contained bits undefined for call ∞s>Move destination is offspring of source, or root was specified ∞r:Specified open/deny modes conflict with current open modes ∞q!Cannot delete non-empty directory ∞p/Insufficient free space on volume for operation ∞o Read beyond logical end-of-file ∞nCannot delete an open file ∞m+Cannot create directory on specified volume ∞l5Unknown UserName/UserID or missing comment/APPL entry ∞k8Some or all of requested range is locked by another user ∞j-Unexpected error encountered during execution ∞iMaximum lock limit reached ∞hServer not responding ∞g6Specified destination file or directory already exists ∞f*Specified file or directory does not exist ∞e0A specified parameter was out of allowable range ∞d1Tried to unlock range that was not locked by user ∞c0Some or all of range already locked by same user ∞bSession closed ∞a<No AFPLogin call has successfully been made for this session ∞` Unsupported AFP call was made ∞_6File/Directory specified where Directory/File expected ∞^ Maximum open file count reached ∞]Server is shutting down ∞\ AFPRename cannot rename volume ∞[Unknown directory specified ∞Z5Icon size specified different from existing icon size ∞YVolume is Read-Only ∞X,Object is MODIFY/READ/DELETE/WRITE inhibited ∞W0the folder being shared contains a shared folder ∞V
afpIDNotFound ∞U afpIDExists ∞T
afpDiffVolErr ∞SafpCatalogChanged ∞RafpSameObjectErr ∞Q afpBadIDErr ∞Ppassword change ∞Omet or exceeded ∞N#password before log-in can continue ∞MCthe folder being shared is inside or being moved to a shared folder ∞LDthe folder being shared is inside or being moved to the trash folder Ωä&SysEnvirons call not present as a trap Ωâ4Non-positive selector was passed to SysEnvirons trap ΩéNThe version requested is greater than the current SysEnvirons trap can provide ΩR1Value returned if Gestalt doesn't know the answer ΩQ(Undefined selector was passed to Gestalt ΩP*Tried to add an entry that already existed ΩO*Gestalt function pointer wasn't in sysheap τ┤ Display Manager unexpected error τ│%Mirroring is on; should be turned off τ▓ More than two displays attempted τ▒"DMBlockMirroring() has been called τ░>Can't Block because mirroring is on (first call DMUnMirror() ) τ»%Mirroring is off; should be turned on τ«*Missing critical pieces of System Software τ¡DRequired software not initialized (eg window manager or display mgr) τ¼-Video Driver does not support display manager τ½Could not find item τ¬+Attempt to add an already installed display α;Postscript error α*No printer chosen α)#Incompatible printer initialization α!Printer not initialized ▌ Codec error ▄ No codec error ▄■Codec unimplemented error ▄²Codec size error ▄ⁿCodec screen buffer error ▄√Codec image buffer error ▄·Codec spool error ▄∙Codec abort error ▄°Codec off screen error ▄≈Codec bad data error ▄÷Codec data version error ▄⌡ Codec extension not found error ▄⌠Codec Condition error ▄≤Codec open error ▄≥Codec Can't When error ▄±Codec Can't Queue error ▄≡Codec Nothing to Blit error █HNo device for channel █GGrab time complete █F Can't do that in current mode █ENot enough memory to grab █D Not enough disk space to grab █C Couldn't get required component █BBad SG channel █A Sequence grab info not available █@Device can't meet request ╪÷Bad controller height ╪⌡Editing not allowed ╪⌠Controller bounds not exact ╪≤&Can't set width of attached controller ╪≥Controller has fixed height ╪± Can't move attached controller ╪≡Apple Event Failed ╪∩Apple Event Type Error ╪εApple Event Bad Key Form ╪φApple Event Not Modifiable ╪∞Apple Event Privilege Error ╪δApple Event Read Denied ╪ΩApple Event Write Denied ╪ΘApple Event Index Too Large ╪ΦApple Event Not An Element ╪τ Apple Event Can't Supply Type ╪µ Apple Event Can't Handle Class ╪σApple Event In Transaction ╪Σ Apple Event No Such Transaction ╪π Apple Event No User Selection ╪Γ Apple Event Not A Single Object ╪ßApple Event Can't Undo ╪αApple Event Local Only ╒Version number not zero ╒Invalid PictInfo ID ╒"Invalid verb combination specified ╒(Custom pick method not in resource chain ╒*The number of colors requested was illegal ╒ The picture data was invalid ═8,Power Manager never ready to start handshake ═7Timed out waiting for reply ═61Power Manager did not start handshake during send ═52Power Manager did not finish handshake during send ═44Power Manager did not start handshake during receive ═35Power Manager did not finish handshake during receive ▒α There is no such insert mode ▒▀7The record data is bigger than buffer size (1024 bytes) ▒▐&The recordIndex parameter is not valid ª(bad network configuration ª'bad IP configuration error ª&%missing IP or LAP configuration error ª%error in MacTCP load ª$error in getting address ª#connection is closing ª"Invalid Length ª!*request conflicts with existing connection ª connection refused ª :failed to initialize MacTCP, probably could not dial modem ª Invalid Stream Ptr ª Stream Already Open ª Connection Terminated ªInvalid BufferPtr ª Invalid WDS ª Open Failed ªCommand Timedout ªDuplicate Socket error ª(Packet too large to send w/o fragmenting ªdestination not responding ªEcho timed out ª no memory to send fragmented pkt ªcan't route packet off-net Ñ Name Syntax error Ñ■ Cache Fault ѲNo Result Proc error ÑⁿNo name server available Ñ√Host name does not exist Ñ·Name server didn't answer Ñ∙ DNR error Ñ°
out of Memory Ñ╞Connection timed out Ñ┼Too many connections åτNot a text file åµ,Not enough heap space to allocate I/O buffer åσ3Not enough heap space to allocate I/O control block åΣ(I/O system error (illegal use of buffer) åπToo many includes åΓ:Attempt to use I/O control block which is currently in use åß Illegal use of I/O control block åαInvalid file type å▀Inconsistent dump format é #Bus error: invalid memory reference é■<Address error: word or long-word reference to an odd address é²Illegal instruction éⁿ Zero divide é√#Check exception: value out of range é·Trap V exception é∙Privilege violation é°Trace exception é≈8Line 1010 exception: the 1010 trap dispatcher has failed é÷.Line 1111 exception: Unimplemented instruction é⌡Miscellaneous exception é⌠AUnimplemented core routine: Unimplemented trap number encountered é≤Spurious interrupt é≥I/O system error é±/Segment Loader error: a GetResource call failed é≡Floating point error é∩Can't load package éεCan't load package éφCan't load package é∞Can't load package éδCan't load package éΩCan't load package éΘCan't load package éΦCan't load package éτ-Can't allocate requested memory block in heap éµISegment Loader error: a GetResource call to read a 'CODE' resource failed éσFile map destroyed éΣ4Stack overflow: the stack has expanded into the heap éπFile server error éΓ'Please insert the disk' é╫2The file named 'Finder' can't be found on the disk é½ Unable to load menu bar defproc é¬'Circular reference in hierarchical menu é£!Can't mount system startup volume ÇÖ5Bitmap font passed to routine that does outlines only ÇÇ7Reserve range -32640 to -32768 for Apple temp disables. ÇBad component selector ÇBad component instance Ç .Temporarily disable card but run primary init. ≥D_Bad transport DNS token ≥D^Bad transport DNS token ≥D[*TransportSend called, but not handle_sends ≥DY Bad transport Listener token ≥DWForced close ping ≥DR#OT DNS Endpoint was forced to close ≥DQ8OT DNS aborted because the network stack was closed down ≥DL5Ping closed because the network stack was closed down ≥DKBad transport Ping token ≥DIDNS Endpoint never opened ≥DG OT networking stack never opened ≥DF'Location: field must be an absolute URL ≥DEBad URL format ≥C² Could not get requested port
